Petroleum Science >2016,??Issue 4:??746-759 DOI: https://doi.org/10.1007/s12182-016-0123-4
Interactions between the fluid and an isolation tool in a pipe: laboratory experiments and numerical simulation Open?Access
文章信息
作者：Hong Zhao,Yi-Xin Zhao and Zhi-Hui Ye
作者單位：
College of Mechanical and Transportation Engineering, China University of Petroleum, Beijing 102249, China;Department of Mining, China University of Mining and Technology, Beijing 100086, China;College of Petroleum Engineering, China University of Petroleum, Beijing 102249, China
投稿時(shí)間：2015-10-14
引用方式：Zhao, H., Zhao, YX. & Ye, ZH. Pet. Sci. (2016) 13: 746. https://doi.org/10.1007/s12182-016-0123-4
文章摘要
A remote-control tether-less isolation tool is a mechanical device that is normally used in pipelines to block the flow at a given position by transforming a blocking module. In this study, the interactions between the fluid and the plug module of the isolation tool were investigated. Simulations of the plug process and particle image velocimetry measurements were performed to study the flow characteristics. Numerical solutions for the continuity, momentum, and energy equations were obtained by using commercial software based on finite-volume techniques. Box–Behnken design was applied, and response surface methodology (RSM)-based CFD simulation analysis was conducted. The dynamic model in the plug process was built by RSM and used to evaluate the influences of the main mechanical parameters on the pressure during the plug process. The diameter of the isolation tool and the diameter of the plug module have strong influences on the process, and the length of the isolation tool has only a little influence on the plug process.
關(guān)鍵詞
-
Isolation tool · Numerical simulation · Transformation · Blockage · Response surface methodology