Petroleum Science >2020,??Issue 3:??1-9 DOI: https://doi.org/10.1007/s12182-020-00439-9
Effect of modified carrier fluoride on the performance of Ni–Mo/Al2O3 catalyst for thioetherification Open?Access
文章信息
作者：Zhao Han, Zhuang Ma, Cheng-Bo Wang, Chun-Yu He, Ming Ke, Qing-Zhe Jiang & Zhao-Zheng Song
作者單位：
Affiliations
College of Science, China University of Petroleum, Beijing, 102249, China
Zhao Han, Zhuang Ma, Cheng-Bo Wang, Chun-Yu He, Ming Ke, Qing-Zhe Jiang & Zhao-Zheng Song
PetroChina Beijing Marketing Company, Beijing, 100101, China
Zhao Han
Corresponding author
Correspondence to Zhao-Zheng Song.
投稿時(shí)間：2020-3-27
引用方式：Han, Z., Ma, Z., Wang, C. et al. Effect of modified carrier fluoride on the performance of Ni–Mo/Al2O3 catalyst for thioetherification. Pet. Sci. 17, 849–857 (2020). https://doi.org/10.1007/s12182-020-00439-9
文章摘要
An alumina support was modified by fluorine via impregnation to investigate the effect of fluoride content on the reactivity of Ni–Mo/Al2O3 catalyst. The catalyst was characterized by X-ray diffraction, N2 adsorption–desorption (Brunauer–Emmett–Teller) isotherms, temperature-programmed desorption of ammonia, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. Sulfur etherification performance of the catalyst was studied using a fixed-bed reactor. The results show that increasing fluoride content increases the pore volume and pore size but reduces the specific surface area. In addition, the degree of sulfidation of Ni first increases and then decreases. The amounts of strong acid and total acid also increase with increasing fluoride content. Performance evaluation of the catalyst reveals that the fluoride content has a minor effect on the thioetherification performance of the catalyst; however, an optimum fluoride content, which was determined to be 0.2%, can ensure lower olefin saturation and an efficient diene selective hydrogenation.
關(guān)鍵詞
-
Fluorine;Thioetherification;Fluorinated ammonia;Selective hydrogenation;NiMo/γ–Al2O3